Most homeowners assume a shower installation is a simple fixture swap, and sometimes it is. But the problems we are called in to fix usually trace back to installations that skipped the evaluation step.
A shower floor that is not pitched toward the drain will not drain properly. Water pools, grout deteriorates, and mold works its way into the substrate beneath the tile. By the time the problem is visible, the damage has spread, and fixing it means pulling up what was just installed.
A new shower valve needs to match the water pressure and pipe diameter already in your home. The wrong valve body for the existing supply setup can cause inconsistent water temperature, pressure drops when other fixtures run, or early valve failure. These problems rarely show up during installation. They appear months later, after the tile is set and the walls are closed.
Whenever new plumbing connections are made, a pressure test should confirm them before the walls close. Without one, slow leaks can develop behind the shower wall unnoticed, leading to structural damage, mold, and expensive repairs.
New shower plumbing tied into corroded supply lines or a partially blocked drain will struggle from the first day. A fixture is only as reliable as what it connects to, so the existing plumbing needs to be evaluated before installation begins.
We begin by understanding the plumbing system your new shower will connect to, because that determines what the right installation looks like for your home.
Before outlining any scope of work, one of our technicians evaluates the existing supply and drain lines serving the shower space. We look at pipe size, water pressure, the condition of what is in place, and whether your current setup can support the shower you want. If something needs attention first, we explain what we found, what it means, and what your options are, so you can decide with full information. While we are in the bathroom, we also tend to spot related issues such as a running toilet, and a toilet repair can often be handled during the same visit.
Not every shower installation is the same project. A custom tile shower with a built-in bench and rain head has different plumbing requirements than a prefabricated pan unit. Walk-in conversions, tub-to-shower conversions, and full remodels each bring their own considerations for drain placement, valve location, and supply sizing, and our bathroom plumbing services cover each of them. We talk through the options with you, including lower-cost approaches that still deliver the right result. Many remodels also include a new toilet installation, and we coordinate both so the bathroom comes together on one schedule.
Our technicians put on shoe covers before they enter your home, work clean, and keep you updated throughout. A job is finished once the installation has been pressure tested, the drains have been verified to flow correctly, and you have seen everything working. Our plumbing services include rough plumbing, valve and trim installation, drain setting, and coordination with tile work when it is part of the project. If something changes the scope mid-installation, we pause and talk it through with you before moving forward.
Our team of eight technicians has years of experience across Glendale and the greater Phoenix area. We are a veteran-owned, family-style shop, and we would rather do the job right the first time than do it fast.
The Phoenix Valley has some of the hardest water in the country, with high levels of dissolved calcium and magnesium. Shower valves, cartridges, and thermostatic controls are precision parts, and mineral scale builds up inside them over time. A valve chosen without regard to local water chemistry may start to stick, drip, or lose temperature control within a few years. We factor this into valve selection and talk with you about whether a softening or filtration solution makes sense.
Glendale’s seasonal temperature swings cause pipes to expand and contract. If supply connections or drain fittings are not made correctly, that movement creates stress points that eventually fail. We account for it in how we make connections on every Valley installation.
We work regularly in Arrowhead Ranch, Westgate, Thunderbird Park, Catlin Court, the Sun City corridor, and the residential areas along 83rd Avenue and Bell Road, including the 85303, 85304, 85305, and 85308 zip codes. We are a Glendale-based team, and the homeowners we serve today are the same community we expect to be serving for years to come.
It depends on the scope. A prefabricated unit with rough plumbing already in place can often be completed in a single day. A tub-to-shower conversion or a custom shower with a relocated drain and new supply connections typically takes two to three days for the plumbing portion, separate from tile work. We give you a realistic timeline before we start.
It depends on the scope. Replacing a like-for-like shower unit without relocating plumbing may not require a permit. Moving drain lines, changing the footprint of the shower, or doing structural work requires a permit from the City of Glendale. We tell you upfront what your project needs.
Yes. Tub-to-shower conversions are among the most common projects we handle in Glendale. The plumbing changes include relocating or resizing the drain, capping the tub supply, and installing a new shower valve and supply rough-in. The scope varies with your bathroom layout and existing pipe configuration, and we walk you through it before any work begins.
Our scope covers the plumbing system: supply lines, drain, valve, and trim. We work alongside tile contractors and coordinate timing so the rough-in is ready when tile work begins. We can offer guidance on valve styles and shower systems that hold up well in Glendale’s water conditions, and the final choice is yours.
The best time to talk to a plumber is before you commit to a specific fixture or layout, since the plumbing in your bathroom may shape what is possible. AquaForce Plumbing & Drain is a veteran-owned, locally operated business with eight trained technicians. We offer service in English and Spanish and are available around the clock for projects that cannot wait.
Call us at 602-362-9380 or reach out through our website contact page to schedule a visit. If an inspection shows the existing shower only needs shower repair, we will let you know.
